Fix No Boot Disk Has Been Detected Or The Disk Has Failed (Easy Way)

Are you facing the frustrating issue of “No Boot Disk Has Been Detected” on your Windows system? Don’t worry; you’re not alone, and there are effective solutions to get your computer back up and running smoothly. Below, we have compiled six efficient ways to tackle this common problem. Let’s dive in!

1. Check Boot Order in BIOS

One of the first steps in troubleshooting this issue is to check the boot order in your system’s BIOS settings. This ensures that your computer recognizes the correct boot disk. Here’s how you can do it:

To access the BIOS, restart your computer and repeatedly press the designated key (usually F2, F10, DEL, or ESC) until the BIOS menu appears. Within the BIOS menu, navigate to the boot options and ensure that the hard drive is set as the primary boot device. Save the changes and exit.

2. Check the SATA Connection

Sometimes, the problem might stem from a loose or faulty SATA connection. Check the physical connections of your hard drive to ensure everything is securely plugged in. If possible, try using a different SATA cable.

3. Use Windows Startup Repair

If the above steps do not resolve the issue, you can use Windows Startup Repair as a solution:

1. Insert a Windows installation media USB or DVD.
2. Boot from the media and select “Repair your computer.”
3. Choose “Troubleshoot,” then “Advanced options,” followed by “Startup Repair.”

This tool scans your system for issues and attempts to fix them automatically.

4. Check for Hard Drive Errors

A failing hard drive can also cause boot issues. You can check for hard drive errors using the Command Prompt:

1. Boot from Windows installation media.
2. Select “Repair your computer,” then open Command Prompt.
3. Type chkdsk /f /r followed by the drive letter (e.g., “C:”) and press Enter.

This command will scan for errors and fix them if possible.

5. Rebuild Boot Configuration Data (BCD)

If your BCD is corrupted, this can prevent your system from booting. Follow these steps to rebuild your BCD:

1. Boot from Windows installation media and open Command Prompt.
2. Type the following commands one by one:
3. bootrec /fixmbr
4. bootrec /fixboot
5. bootrec /scanos
6. bootrec /rebuildbcd

6. Restore Your System

If all else fails, restoring your system to a previous state may resolve the boot issue. Access the “System Restore” feature from the recovery options and choose a restore point prior to when the problem started. Follow the prompts to complete the restoration.

By following these steps, you should be able to resolve the “No Boot Disk Has Been Detected” issue and get your system back on track. Remember to back up your data regularly to avoid losing important files during such troubleshooting processes.